Wacom Intuos is a very budget-friendly pen tablet for beginners wanting something portable and easy to use.

After you unbox the drawing tablet, the first question is how to start it and connect it to a computer to work more efficiently.

Need help getting starting with your new Wacom intuos tablet? Don’t worry! Connecting the drawing tablet to a computer is not that complicated task.

It is super easy to connect on Windows, Mac or even Android. Just follow the steps in this article to setup your Intuos.

How to connect wacom intuos CTL-100W pen tablet to a computer?

The WL-versions of wacom Intuos have Bluetooth capabilities: CTL-4100WL (Intuos Small Bluetooth), and CTL-6100WL (Intuos medium Bluetooth).

The WL version also supports USB cable connection. So if the bluetooth isn’t working to your satisfaction, just attach it with a cable.

How to connect wacom intuos CTL-100WL tablet to computer through USB Cable?

Plug the USB cable into your tablet and computer. Once you attach the wacom tablet via a USB port, it will start working.

Setting up this Wacom intuos tablet was easy. You only need to download and install the required driver from the Wacom website. Registering the device, by following the instructions after logging into your Wacom ID, was quick.

How to connect wacom intuos CTL-100WL tablet wirelessly or use a Bluetooth?

You can work wirelessly by pairing your device to a computer by Bluetooth. Your device is battery-powered when you are connected by Bluetooth.

Step 1: Unplug your tablet

If your wacom intuos tablet is connected to your computer by USB, disconnect the USB cable.

Step 2: turn on the computer Bluetooth option

Open the Devices settings in the Windows settings on your computer and select Bluetooth.

I you are using an apple mac, Open the Bluetooth settings in the Mac System Preferences or and turn Bluetooth on.

Step 3: turn on the tablet Bluetooth option

There is a button at the top-center of the Intuos which you can use to pair the Bluetooth to your computer.

Press and hold the power (middle) button of your Intuos for 2 seconds and the LED will start blinking blue.

Step 4: Pair the two devices

On your windows computer, you will now see that the ‘Wacom Intuos’ is ‘Ready to pair’ so now go ahead and click on ‘Pair’.

On your Mac, select ‘Connect’ for the ‘Wacom Intuos’ and you´re good to go.

Pro Tips for improving Bluetooth connectivity

1. Check to see if your computer (especially desktop) has a built-in Bluetooth antenna. If not, purchase and install a Bluetooth adapter. Version 4.0 or higher is recommended.

2. Move your device closer to your computer, and make sure that the space between the computer and the device is clear.

If your computer was previously connected to a computer which is now off or out of range – usually 10 m, the blue LED above the power button will blink quickly for 15 seconds.

3. Unpair other Bluetooth devices, especially any that transfer a large amount of data, such as headphones, speakers, or storage devices. Otherwise it will cause a lot of disruption.

4. The blue LED will stop blinking when your tablet is connected. After you pair your computer to your tablet, you can switch between a Bluetooth and USB connection by plugging and unplugging the USB cable.

How to connect a wacom intuos CTL-100WL tablet to and android phone?

Below here are the steps on how to connect the drawing tablet to the android via cable:

Step 1: Check the Compatibility

Check to make sure your Android device (smartphone, tablet) is compatible. You can see the support list from their official site.

Step 2: Find a compatible USB OTG connector

In order to connect your Wacom Intuos with your Android device, you need a special adapter called a USB OTG connector.

Here is a list of approved connectors you can purchase at an online retailer:

CableCreation CC0018 / Type-C
Rampow USB C to USB3.1 / Type-C
StarTech UUSBOTGW / microUSB
Ugreen10822 / microUSB
Nonda MI22SGRN / Type-C
Basesailor B07449RJV8 / Type-C

Step 3: Upgrade the Firmware on your device

Connect your pen tablet to your computer and update your firmware on your Wacom Intuos through your Wacom Desktop Center software.

Clip Studio Paint (phone version) and some other drawing apps support it, but you’ll be able to use just half of your tablet, since the screen is smaller.

Can I connect Wacom Intuos CTL-100WL tablet to an Android device with Bluetooth?

Wacom Intuos (CTL-4100WL & CTL6100WL) can be used with Android 14 & later devices that have Bluetooth LE connectivity.

Conclusion

Connecting wacom intuos drawing tablet to a windows or mac Computer through USB Cable or wirelessly is a simple technique. It is as simple as putting your tablet on charging.

If you are getting a tablet setup for the first time, use the USB cable.

The Intuos will work wirelessly for a minimum of 15 hours, and it takes about 3 1/2 hours to charge. When you have it plugged in through USB, you don’t have to worry about charging it, the USB connection powers the tablet.

In general, I recommend using the cable because any wireless connection typically has a little extra latency and is more prone to interference.

Hope you will find this post worthy, and you end up connecting the drawing tablet successfully.

Explore More: 7 Best Wacom Drawing Tablets of 2025